# K501U Cyberdeck

A cyberdeck built from salvaged ASUS K501U laptop components and Orange Pi 5 SBC.

## Project Status

**Phase:** Component acquisition and planning

- [x] Salvage analysis (K501U components)
- [x] Display identification and controller board ordered
- [x] SBC selection (Orange Pi 5 16GB)
- [x] Storage architecture planned
- [x] USB expansion design
- [x] Case nomenclature and orientation defined
- [x] Build approach: wooden case + salvaged lid canopy
- [x] Input device: ThinkPad TrackPoint keyboard
- [x] Power system: IP5389 board + 18650 cells (preliminary)
- [x] Video output: mechanical HDMI A/B switch
- [x] Port layout defined (10 ports + SD reader + Kensington)
- [ ] Case design (dimensions, internal layout)
- [ ] Power system board selection and testing
- [ ] Bow wall design (power input, fan exhaust)
- [ ] Fabrication
- [ ] Software configuration

## Components

### Salvaged from ASUS K501U

| Component | Model | Status |
|-----------|-------|--------|
| Display | Innolux N156HGE-EAB (Rev. C2) | Controller board ordered |
| Hinge mechanism | Original K501U | Available |
| Webcam | K501U module | Available |
| WiFi antenna | K501U | Available |
| Cooling fan | K501U | Available |

**Not reused:**
- RAM (DDR3L soldered, incompatible with modern SBCs)
- SSD (owner repurposed)
- WiFi card (Intel 7265NGW, no E-key slot on OPi5)

### New Components

| Component | Selection | Status |
|-----------|-----------|--------|
| SBC | Orange Pi 5 (base, 16GB) | eBay bid pending |
| Display controller | 30-pin eDP to HDMI | Ordered (~$24) |
| Storage (boot) | MicroSD 64GB Endurance | To purchase |
| USB hub | Powered 7-port USB 3.0 | To purchase |
| Storage (data) | USB 3.0 SSD enclosure | To purchase |

## Documentation

- [Salvage Analysis](docs/salvage-analysis.md) - K501U component breakdown
- [SBC Selection](docs/sbc-selection.md) - Orange Pi 5 details and rationale
- [Storage Architecture](docs/storage-architecture.md) - SD card + USB storage plan
- [USB Expansion](docs/usb-expansion.md) - Hub selection and port allocation
- [Parts List](docs/parts-list.md) - Bill of materials with costs
- [Design Decisions](docs/design-decisions.md) - Build approach, nomenclature, layout
- [Power System](docs/power-system.md) - IP5389 battery management decision
- [Port Layout](docs/port-layout.md) - External port placement and allocation

## Quick Reference

### Display

- **Panel:** Innolux N156HGE-EAB (Rev. C2)
- **Size:** 15.6" 1920×1080
- **Interface:** 30-pin eDP
- **Controller:** Standard 30-pin eDP to HDMI (~$24)

### SBC

- **Board:** Orange Pi 5 (RK3588S, base model, 16GB RAM)
- **Storage:** MicroSD slot + USB 3.0 external
- **USB:** 1× USB 3.0, 2× USB 2.0 native
- **Power:** USB-C PD via IP5389 power board, 18650 cells

### Cost Estimate

| Category | Cost |
|----------|------|
| SBC | ~$104 |
| Display controller | ~$24 |
| Storage (SD + hub + enclosure) | ~$34 |
| Power system (board + cells + fuse + charger) | ~$44 |
| HDMI switch + panel cables + SD reader | ~$33 |
| **Subtotal** | **~$258** |

(Excludes case materials and misc hardware. Battery included in power system.)